Instead of using traditional square-holed wall pass-through boxes, we came up with a minimal way to pass cords through walls with 3D printing. Check out the video and get the download below
WAYS TO SUPPORT US
We made a simple wall cord pass-through. I don’t recommend using this to pass anything from outside to inside ๐.
-
Two Internal Diameter Options: 1.05″ or 1.25″
-
Minimum Wall Thickness: 3.6″
-
Maximum Wall Thickness: 5.4″
-
Higbee start threads
Supplies
Includes Affiliate Links
-
White PETG
-
Hole Saws
-
1.5″ Hole Saw – for 1.05″ ID version
-
1.75″ Hole Saw – for 1.25″ ID version
-
Adjustable (like I use in video that might not go small enough)
-
Print Settings
-
Used PETG but PLA would work likely too.
-
Layer Height: 0.16mm
-
Walls: 3
-
Top / Bottom Surface: Concentric
-
Infill: 15%, Gyroid
-
Slow Down for Overhangs: โ
-
No Brim or Support Needed
-
Slower Outer and Inner Walls will make for a better thread (100 mm/s on X1)
PDX CNC Products
DO US A FAVOR — SUBSCRIBE TO OUR YOUTUBE?
Click to subscribe โคด